HAHAHAHAHA
oh ok i gotcha 
i thought u were talkin bout sumthin that was completley "out there"
| www.RiversideRenegades.com http://riversiderenegades.com/forums/ |
|
| SO COLD IT HURTS? http://riversiderenegades.com/forums/viewtopic.php?f=5&t=249 |
Page 1 of 1 |
| Author: | crustycheese [ Tue Sep 28, 2004 8:39 pm ] |
| Post subject: | SO COLD IT HURTS? |
u know when u have a semi-auto(or any gun) when you shoot fast the Ram Air Chamber (the shape under the barrel) gets really cold? if i were 2 get a reactive trigger would it hurt my air chamber if i shot REALLY fast and it got 2 cold? would i have to get a differant air chamber to prevent any damage? or should i just watch how i shoot and not go OVERBOARD on rappidly firing? or is it just Co2? i don't know thats why i'm asking ANY help would be great |
|
| Author: | Azzy [ Tue Sep 28, 2004 9:22 pm ] |
| Post subject: | |
That air chamber is just boiling off CO2 liquid. You can get an expansion chamber, but they have a point where they dont work well, and just cost too much. Sounds like you would benifit most from an anti-siphon tank. They are a normal CO2 tank that is fitted to your gun. It uses a tube with a tiny hole(if done right) to try and keep the liquid out of your gun. Any paintball shop worth its muster should be able to install them. Tr punishers for that. You will have to bring the gun to them, and may only be able to use that tank for that gun, depending on your asa. Combine an anti-siphon CO2 tank and a good regulator like a PPS Stabilizer, or even a WGP Sledgehammer, and you will have a good stable setup, that wont spike when it gets warmer out. As for it doing damage to the gun, doubtful. Running liquid on some guns will cause them to wear faster as they get beat up quite a bit form it, and some guns (Mega-Z, 68 Special, SMG-60) wont run without the extra Umpfh that liquid co2 gives. |
|
| Author: | mitshu04 [ Tue Sep 28, 2004 9:31 pm ] |
| Post subject: | |
like azzy said, you might notice more wear on your gun and internals. esp orings and fittings around pressurized parts. but nothing drastic should be noticed. |
|
| Author: | crustycheese [ Wed Sep 29, 2004 3:56 pm ] |
| Post subject: | |
so Azzy, how much would all that run me for? $money$ wiz |
|
| Author: | prince valiant [ Wed Sep 29, 2004 6:59 pm ] |
| Post subject: | |
awh just buy a wagner paint sprayer |
|
| Author: | crustycheese [ Wed Sep 29, 2004 7:01 pm ] |
| Post subject: | |
WHAT? Whats that? |
|
| Author: | prince valiant [ Wed Sep 29, 2004 7:13 pm ] |
| Post subject: | |
go to home depots paint department |
|
| Author: | crustycheese [ Wed Sep 29, 2004 8:06 pm ] |
| Post subject: | |
HAHAHAHAHA oh ok i gotcha i thought u were talkin bout sumthin that was completley "out there"
|
|
| Author: | prince valiant [ Thu Oct 07, 2004 8:41 pm ] |
| Post subject: | |
that is pretty far out there |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|