www.RiversideRenegades.com

Home of Riverside Renegades Paintball
It is currently Sat Dec 31, 2016 1:41 pm

View unanswered posts | View active topics


Board index » Renegades Corner » Tech Area

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PaintYa
 Post subject: Bottomlines
PostPosted: Thu Apr 14, 2005 10:19 pm 
Offline
User avatar

Joined: Tue Mar 16, 2004 10:45 pm
Posts: 272
from what i've seen, bottomlines don't look very difficult to set up, any tips?

lates,

J.T.
Top
 Profile  
 
jamesmbaldwin
 Post subject:
PostPosted: Thu Apr 14, 2005 11:30 pm 
Offline

Joined: Sat Feb 07, 2004 12:42 pm
Posts: 287
use teflon or locktite or plumbers putty on the fittings then just screw them in, some even use the brush crazy glue. Marco or micro line can be tricky but someone at riverside I'm sure would help you with that.

_________________
www.paintballreenactors.com combining paintball with history
Top
 Profile  
 
PaintYa
 Post subject: thanks
PostPosted: Thu Apr 14, 2005 11:34 pm 
Offline
User avatar

Joined: Tue Mar 16, 2004 10:45 pm
Posts: 272
i appreciate it jb.

lates,

J.T
Top
 Profile  
 
Azzy
 Post subject:
PostPosted: Thu Apr 14, 2005 11:59 pm 
Offline
Site Admin
User avatar

Joined: Wed Dec 31, 1969 7:00 pm
Posts: 1304
Location: Finleyville, PA (outside the PGH taxes!)
BLUE locktite... never red. Let it dry for a while, just a drop or 2 works.

Teflon is good, but it will enlarge fittings, as well as mess things up if you get sloppy with it.

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]
Top
 Profile  
 
ajg1
 Post subject:
PostPosted: Fri Apr 15, 2005 10:11 pm 
Offline
Riverside Renegade
Riverside Renegade

Joined: Tue Apr 13, 2004 3:09 pm
Posts: 139
Location: Pittsburgh, PA
Locktite I put some blue on a couple of set screws for a trigger a few weeks ago I let it dry for 2 days and it was still wet when I put it together. Micro line is a little to restrictive flow-wise it would be more suitable for a pump I run macro on all my guns only one blowout ever and it was at the MMG about 4-5 years ago. I saw a little bulge in the line and tried to get one more insertion in and when I got shot out and left the field I stopped at the "CIA" tent to check the score of the game I set my Cocker down on the table for two seconds and then BOOM!!! there goes my gun flying across the counter spinning in a circle of a white CO2 cloud. Scared the hell out of all of us. Steel braided lines are nice but I am not sure if you can get them in any length you wish so you might be stuck with too short of to long of a hose macro you can cut to any size just make sure to cut it strait.
Top
 Profile  
 
Azzy
 Post subject:
PostPosted: Sat Apr 16, 2005 4:35 pm 
Offline
Site Admin
User avatar

Joined: Wed Dec 31, 1969 7:00 pm
Posts: 1304
Location: Finleyville, PA (outside the PGH taxes!)
Most Macro and Micro line is not rated for 800 PSI... just usually about 300 psi. Thats why it blows out easy, and can send nice peices of plastic shooting through the air.

Hardline works great, and if you do it right, high pressure brake line fits into macroline fittings.....

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Renegades Corner » Tech Area

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group