| www.RiversideRenegades.com http://riversiderenegades.com/forums/ |
|
| HP bottles http://riversiderenegades.com/forums/viewtopic.php?f=5&t=545 |
Page 2 of 3 |
| Author: | PittPT08 [ Tue Oct 11, 2005 9:53 pm ] |
| Post subject: | |
What type of tank is it james? I tried lookin up centerfire but couldnt find anything. How much you askin? |
|
| Author: | prince valiant [ Wed Oct 12, 2005 6:48 pm ] |
| Post subject: | |
i think he is talking about centerflag. www.centerflag.com |
|
| Author: | PittPT08 [ Wed Oct 12, 2005 9:05 pm ] |
| Post subject: | |
Would I need to buy a regulator in order to run compressed air on my spyder? |
|
| Author: | crustycheese [ Thu Oct 13, 2005 7:39 am ] |
| Post subject: | |
no, you don't need a regulator. Spyders are high pressure guns and need more pressure to opperate, only low pressure guns need regs. I'm pretty sure Spyders run at sumthing around 800 psi, and most LP gun run at 1/5 of that and since HPA tanks put out more pressure than the gun needs, it needs to be regulated on a LP gun. But since high pressure tanks and preset tanks have a output of 800 or 850 psi it doesn't need regulated on your spyder. |
|
| Author: | PittPT08 [ Thu Oct 13, 2005 10:50 am ] |
| Post subject: | |
Thanks for the input |
|
| Author: | PaintYa [ Thu Oct 13, 2005 11:18 am ] |
| Post subject: | ? |
Running a Spyder on Compressed Air isn't really cost effective. You're just as good with CO2 unless it is cold out. Just my .02. J.T |
|
| Author: | PittPT08 [ Thu Oct 13, 2005 11:53 am ] |
| Post subject: | |
Thanks paintya, I'm just tryin to look into the future. I really just started playing seriously this summer, but absolutely love it. I'd eventually like to upgrade to high end mechanical gun, thats the only reason I'd like to get the HP air. |
|
| Author: | WhiteEagle [ Thu Oct 13, 2005 8:05 pm ] |
| Post subject: | |
No NOID= No need for HPA enless in the winter. |
|
| Author: | BellyDown [ Fri Oct 14, 2005 7:11 am ] |
| Post subject: | |
I thought, since HPA doesn't need to expand like co2 does, any marker could get better consistancy in its FPS by using it. |
|
| Author: | PaintYa [ Fri Oct 14, 2005 3:04 pm ] |
| Post subject: | HPA |
Belly, that is true. Any marker using HPA would be more consistent. However, a good reg would do the job on a spyder, or a cocker, etc. HPA from what I gathered is best used on a Bko, or an electric marker such as an Ion, etc. Then again, Antisiphon would work to. I guess it all depends on your pocket book. Later, J.T. |
|
| Page 2 of 3 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|