www.RiversideRenegades.com

Looking for a speed demon bolt for a KP rifle. Decided to get it finished up for the coming season.

Also interested in a newer sheridan blue streak pellet rifle trigger group and internals.

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]

Is that a palmers bolt of the kp? I know my dad has a kp with a palmers derlin bolt, he won't sell it because its one of his "trophies", just curious if thats what you mean. The bolt is redish so I'm thinking it might be a cooper-t? He says its a palmers derlin though.

_________________
www.paintballreenactors.com combining paintball with history

If it is a red one, then most likely its an aluminum cooper-t one.

I believe the speed demon was made by Sheridan but copied from Cooper-t, thus the reason for the big lawsuit back in the day.

Your dad would like this gun, its getting a new stock, fitted for a lever action from a winchester rifle, and the direct feed hack job is being retro fitted to a 15 round stock side tube.

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]

nice, I've dont a bunch of feeds but all mine are ugly cheap rigs, ussaly a pcv 3-way pipe that goes over the reciever, I guess it would help if I knew how to weld . And I've never seen a gun with lever action should be interesting.

_________________
www.paintballreenactors.com combining paintball with history

mcarterbrown.com's custom projects forum has a good sticked article on brazing and soldering sheridan brass... best to practice on pipe first, but it is a step in the right direction.

Oh, also contacted Tim Macmurray of Mac1 airguns (He used to make the Aniallator guns back in the day) and trying to get him to convert my gun to dual 12gram use, so I can get ~70 shots off a load of cartridges.

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]

Not sure, but I may have seen an old sheridan with dual 12grams when looking through an old PB magazine. That would be enough for an entire game unless you were realling trying to waste ammo. On a side note I heard that a new brass eagle blade game out with dual 12grams. It could be photoshoped though. http://www.xpaintball.com/breabltupagu.html

_________________
www.paintballreenactors.com combining paintball with history

Just checked Brass Eagle's website and they list the Blade Turbo as coming soon. It will accept dual 12 grams. How funny.

Well, some custom KP2's had them, as well as the BE90 (not a brass eagle gun)

Actually, the Blade 2 looks to be a newer version of the BE90...

http://www.vintagerex.com/cgi-bin/index ... 0&man=TASO

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]

Saw this on e-bay and wondered if the bolt in it was the same speed demon you were looking for. Not sure if KP bolts are interchangable with that gun though.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... eName=WDVW

_________________
www.paintballreenactors.com combining paintball with history

Found out that KP2 bolts were different sizes than all the other PMI / Sheridan brass, except maybe the K2.

Have that gun out right now getting fitted for a lever action, and the gentleman doing it is making me a bolt.

Thanks for thinking of me though

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]