Have a 68 special with multiple barrels (10" stock plastic and 12" brass).
http://riversiderenegades.com/azzytemp/68sp.JPG
Originally a SMG60 and has the brass sleeve insert that keeps it from chopping balls that would normally go in the squeegee port.
http://riversiderenegades.com/azzytemp/Sleve.JPG
(and that port pic is an older one, paint is cleaned out now )
Will be selling that and the 7oz siphon with an old sherader valve that has a tendency of leaking.. unless I find a new valve and a vice to do the work on.
Also has a full set of spare internals (68 Sp without a body), o-rings may be a little old, but there is a whole valve, hammer and lots of unknowns to me in there.
http://riversiderenegades.com/azzytemp/parts.JPG
Condition: Old war horse. Just got done cleaning it, as far as I dare clean. When i got this gun, it had old... real old paint in the chamber, caked up in the détente. i cleaned it out, lubed up the back tube and bolt, and replaced the spring in the détente. Other than that, haven't touched her. The copper pipe sticking out of the feed is there so you can attach the surgical hose with the pipe clamps. Sounds hokey, but it holds just about anything, a revvy, halo even a qloader hose fine. Speaking of feeding it.. Ive fired this one full auto, sustained, with the q-loader, no chops with good paint.
If you want a museum piece, this isn't it. its worn and showing age, and even has some paint in parts I dare not remove (ever get rust off an old truck? they stop running after that), but has quite a few games left in it. Shoots straight, and fun as all hell.
Asking 105 for it, PM or email me.
_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]
Login
Register
FAQ
Search
