www.RiversideRenegades.com

Is it possible to put an e2 blade on the 04 and/or 05 prostock? You can

pick up an 04 cocker on actionvillage for 279.00 and an e2 blade for 300.

They say you'll have to drill out eye holes on the body. Anyways i called

up and asked planeteclipse and they say you can stick an E blade on a

center feed cocker, is it true?. Any feed back would be helpful. Thanks

P.S I did read that they gave a template for the eyes to be drilled.

_________________
SwAGGeR at One Zero Zero and climbing.

You can put an eblade on any cocker.. Ive seen them on 96 cockers, just for kicks (and right feeds can be fitted with eyes)

Heck, with a little work, I have seen 2 pgp's with e-blades, and 1 nasty typhoon. Blazers can even be ordered stock with them...


Personally, I would go with a CCM body, good quality, good service, and aluminum matched annoed pneumatics

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]

Those ccm bodies are pretty nice indeed.

This thread has 2 ebladed pgps's for reference....

http://www.mcarterbrown.com/cgi-bin/ind ... 20&start=0

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]

Sorry to post yet again.. but came across some info that Eclipse is selling an adapter to put the e-blade on a trilogy cocker.

Compact, cheap, fast. Once you get past the milling and anno, all WGP cockers are the same internally, so you decide.

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]

I put one on an old cocker running on HP springs with heavy parts, and lets just say it was like a super tippmann response trigger.

_________________
www.paintballreenactors.com combining paintball with history