www.RiversideRenegades.com

Home of Riverside Renegades Paintball
It is currently Sat Dec 31, 2016 1:41 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Pre-Season Projects?
PostPosted: Tue Mar 14, 2006 1:29 pm 
Offline
Site Admin
User avatar

Joined: Wed Dec 31, 1969 7:00 pm
Posts: 1304
Location: Finleyville, PA (outside the PGH taxes!)
Doc started a similar thread over at his site... so i would ask here.

What are you guys working on to have finished by the time the nice weather rolls around?

Personally working on a Electronic vector conversion, custom board, impulse grip, break beam eyes. Going to have some interesting custom bits, nothing on the stock gun will be modded to keep the value of the classic gun. (IE, can switch from E-gun to mech easily for use at the home field)

Mods -
- impulse grip and tray for battery, board and solenoid
- Qev's (maybe)
- NOS blemish barrel will get drilled for eyes, going to make it so it is still field strip-able w/ eyes attached to the gun
- custom board designed, programmed and built by a fellow CC (anonymous until he says otherwise)
- WGP or other lpr mounted on a drop forward, hose routed through grip and tub
- tray mount for tub, to blend into old profile
- truck bed liner coating on all fabbed parts to give the look and feel of the stock grip.

Pics to follow, going to get to work on the tray mount this week, and the rest when the new parts get here.

Gonna be fiun and loud, and hopefully ready for use by spring Castle at EMR.

Mockup - http://www.riversiderenegades.com/azzyt ... 141535.JPG

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]


Last edited by Azzy on Wed Mar 15, 2006 8:48 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 15, 2006 8:41 am 
Offline
User avatar

Joined: Sat Nov 05, 2005 3:07 am
Posts: 35
I'm all done. I have bought and built everything I needed. I'm ready to go. Now only if the weather would get on the same page. Only thing that is on back order is my water bladder for my vest, but I don't need it to play.

:lol:

Here is my list of stuff.

Ariakon Combat Pistol Package
BSA 30mm Red Dot Sight
Bush Rag Rifle Rag
Bush Rag Sniper Suit
Cops 911 Scout Vest / Digital Woodland
Crossfire 68ci 4500 psi Carbon Bottle
Dye Lock Lid Pods x 6
J & J 16 inch ceramic barrel
Major Paintball M12TR Trip-wire Mine
Major Paintball Master Mine
Mil-Sim Commando Gear and Gun Pack
ProTeam ASR-1 Sight Rail
ProTeam Tac Cap x 2
Rocky Fort Hood Style Boots
Scott Paintball Mask
Special Ops A-5 Flattop Rail
Special Ops A-5 M249 Saw Stock Air through kit
Special Ops Digital Woodland 2-pod tactical leg pouch
Special Ops Digital Woodland Bottle Pouch
Special Ops Fusion Battle Jersey
Tippmann A-5
Tippmann Remote Line
Tru-Spec Digital Woodland BDU Pants x2
Tru-Spec Digital Woodland Boonie Hat
Tru-Spec Digital Woodland Patrol Cap
Uncle Mike's Nylon Duty Belt

Overkill don't know, but I'm really interested in doing senario games.

NOOb? Oh hell yeah :lol:


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 15, 2006 8:47 am 
Offline
Site Admin
User avatar

Joined: Wed Dec 31, 1969 7:00 pm
Posts: 1304
Location: Finleyville, PA (outside the PGH taxes!)
Is there a project in there?

Or is that going to be one hell of a pistol? :wink:

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 15, 2006 11:45 am 
Offline
User avatar

Joined: Sat Nov 05, 2005 3:07 am
Posts: 35
No the project was getting all my stuff together and upgrading my A-5. I think I posted pictures of it in my intro thread. That list unfortunatly is in alphabetical order off another one of my profile sites. :lol:

Now I'm just itching to get out and use it all.


Top
 Profile  
 
 Post subject: Project stuff
PostPosted: Wed Mar 15, 2006 8:11 pm 
Offline
User avatar

Joined: Sat Sep 17, 2005 1:42 pm
Posts: 128
Location: Elizabeth, PA
I recently bought a BT-4 Combat and it blew an O-ring out of the power valve the first day my wife had it out.

I figured out why it blew. Much like the Tippmann 98 Custom, the power valve is bolted to the body of the gun. The air line screws in to the power valve. Whoever assembled the gun had the air line screwed in too far causing the brass plunger assembly to knick the steel threads. Sharp bits of metal are no good for soft o-rings.

While I had the gun apart, I broke out the Dremel and polished most of the internals.

I think a Q-loader for my BT-16 Tactical is the next project on my list. I also plan on polishing some of the internals on the BT-16.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 16, 2006 12:45 am 
Offline
Site Admin
User avatar

Joined: Wed Dec 31, 1969 7:00 pm
Posts: 1304
Location: Finleyville, PA (outside the PGH taxes!)
SB - Gothcha :) Feel the same way

V - Just picked up a Qloader setup, with the old mounting recievers. Got enough to mount one on my Hurricane, and maybe one on my Sniper 2.

Hmmm a 3oz, and 100 rounds next to the T-stock... hmmmm...

_________________
Later,
Bryan "Azzy" Spiegel
www.riversiderenegades.com
[url:3eidvjl2]http://www.PaintBallCity.org[/url:3eidvjl2]


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 16, 2006 8:51 am 
Offline

Joined: Thu Jul 14, 2005 5:23 pm
Posts: 31
Location: South Hills
Still waiting to install my Palmer's on my Spyder. Not only do I not have a chrono lieing around (instructions state you need to chrono before installing), but I took off the X-chamber just to see how this thing was going to hook up...well it's not. So now I have a new VA on the shopping list. Just have some real world things to take care of 1st. Suggestions on a decent VA appreciated.

_________________
I know what your thinking? Did I fire 6 paintballs or only 5


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 16, 2006 9:55 am 
Offline
Moderator
User avatar

Joined: Wed Feb 04, 2004 10:40 am
Posts: 484
Location: pittsburgh, pa (rankin to be exact)
i would look into either lapco or benchmark. best are the ones that have a collar that seats against the body


Top
 Profile  
 
 Post subject: projects
PostPosted: Tue Mar 21, 2006 6:10 pm 
Offline
User avatar

Joined: Tue Mar 16, 2004 10:45 pm
Posts: 272
well, i haven't really worked on anything so to speak, but I did pick up a freak kit and a gorilla air 68/45. I havent gotten the tank yet, though it should be here in the next couple of days.
<p>I'd like to get a ccm grip frame on the cocker, a single swing trigger would be nice. Maybe next month.

lates,

J.T


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group